JD Institute of Fashion Technology
Basic Tools Used for Jewellery Making

One of the most interesting and overwhelming parts of learning something new as a craft like Jewellery designing is knowing what supplies one needs to get started. For bead weaving or something like wire, workers would undoubtedly need tools like pliers or wire cutters in order to help with the jewellery designing work. Most of them can be easily purchased at a craft store or from online retailers or, for a matter of fact, even from hardware stores. But we beware you that before actually spending your pay on your new hobby, you should be aware of the necessity of each tool before you spend money on it. Here, we would suggest to you some of the simplest yet best tools used for jewellery making. 

Best tools used for jewellery making:

1. Wire Cutters: Wire cutters are one of those that are counted as essential while designing jewellery. It is a must-have tool for all the jewellery designers out there. This tool has to be present in every jewellery designing kit. This tool allows you to cut eye pins, headpins and stringing wire. We would want you to know that you might not need to purchase this tool as most homes already have one in their toolbox. Always check in your house before you purchase a wire cutter. Also, just a pro tip for the jewellery makers, you have to use a memory wire cutter for cutting a memory wire. Regular wire cutters aren’t explicitly designed for it. 

2. Round Nose Pliers: You won’t find round nose pliers in your house’s toolbox as these are mainly used for jewellery making. The round edges of these round nose pliers are perfect for creating some simple loops and other rounded wire elements in jewellery. In the jaws of the round nose, pliers direct towards the point, which allows you to position your wire along the jaw to get the exact size of loop you desire. If you want to have a large loop, then place your wire closer to the handles. In order to have a smaller loop, place it towards the tip. And if you want to make loops of consistent size, you can mark the pliers with a permanent marker. This way, you can place your wire in the same location as you desire every time. After you are done with your jewellery making work, you can simply clean the round nose pliers with alcohol in order to remove the mark.

3. Chain Nose Pliers: Many times, you might have been fooled into using the standard needle nose pliers in place of chain-nose pliers. And maybe in some instances, they may have worked just fine. However, we would like to give a reality check here. The flat jawed chain nose pliers contain a flat surface perfect for gripping the jewellery wires without leaving marks. The same goes with chain nose pliers with shorter jaws than the traditional needle nose pliers, making them easier to work with. One can easily use chain nose pliers for opening and closing jump rings. This tool is very helpful as it can easily manipulate jewellery into small spaces.

4. Flat Nose Pliers: Though flat nose pliers are not one of those essential jewellery tools in the jewellery maker’s toolbox, they are helpful while jewellery designing. The non-tapered tip and wide surface area of the flat nose pliers make them easier to grip the jewellery wire, and thus, they can be included as a jewellery tool option. If you choose to forgo this item’s purchase, you will still need to have two sets of pliers that would shape and hold the jewellery during designing. You either can buy a set of flat-nose pliers or buy a pair of chain-nose pliers and a pair of flat-nose pliers separately for jewellery designing work. The choice is all yours. 

5. Crimping Tool: Some jewellery makers use chain nose pliers or flat nose pliers in order to smash a crimp bead into the right position on the jewellery where the wire is placed in between the beaded segments. We would like to clarify that this is not the recommended way of doing it. Smashing the jewellery metal creates an unsightly sharp edge that can cut through one’s delicate skin. Therefore, a crimping tool or crimping pliers with special notches in the jaws is slightly flattened and round the crimp bead onto the wire. You can even use one notch to crimp and the larger notch to shape the bead into a round. You can also use this crimping tool to secure a clasp at the end of a project.

6. Bead Stoppers: If you have stringing beads into your jewellery closet, then you may buy bead stoppers for your jewellery designing kit. This simple bead stoppers tool can prove to save you tons of time and efforts by keeping the stringing beads in place on the wire. In order to do this bead stoppers tool right, you can squeeze the loops on either end of the stopper to spread the springs apart. Then, insert the bead wire and release the loops. This is meant to prevent your beads from sliding off one end of the Jewellery as you work on the other side.

These were some of the necessary yet best tools used for jewellery making. You need to have a pair of all of these to have a manageable jewellery designing career. Some of these simple jewellery making tools make sure to keep up with the elegance of the jewellery while jewellery designing. We at JD institute offer jewellery designing courses meant to furnish your talent for the art of jewellery making well. Pursuing a jewellery designing course opens various career pathways in the jewellery industry; one among them is being a jewellery maker.